Solar panels in Beverly, Chicago

Beverly is a Far South Side neighborhood of large lots and older homes on one of the few ridges of high ground in Chicago, and much of it sits in a historic district.

• Much of Beverly lies in the Ridge Historic District, listed on the National Register of Historic Places in 1976, with more than 3,000 buildings dating mostly from 1870 to 1930 in styles from Queen Anne to Prairie School.
• Three City of Chicago Landmark Districts sit inside the Ridge area: Longwood Drive, the Beverly/Morgan Park railroad stations and Walter Burley Griffin Place, a cluster of small Prairie-style houses on West 104th Place designated in 1981. Homes in those districts get extra city design review for solar.
• Beverly lots are large for the city, some up to 1.5 acres, and most houses were built between 1890 and 1930.
• The Beverly Area Planning Association, founded in 1947, is the neighborhood group for Beverly and Morgan Park.

• Small rooftop systems can use the Department of Buildings' Express Permit Program: inverter output of 13.44 kW or less, roof-mounted only, installed by a city-approved solar contractor, with one installation per ComEd service. Larger or ballasted systems need drawings from an Illinois-licensed architect or structural engineer.
• Residential panels must sit at least 3 feet from the edge of the roof.
• Only electrical contractors licensed by the City of Chicago can do the electrical work, so ask installers for their Chicago license.
• The city's solar zoning policy calls for separate design review for Chicago Landmarks and homes in Chicago Landmark Districts, and says rooftop panels there should be placed so they aren't visible from streets and sidewalks.

ComEd then approves the connection and your installer files for the rebate. For the full city picture, see solar in Chicago and solar permits in Illinois, town by town.

Illinois Shines, the state's solar incentive program, had approved 457 home-sized solar systems (25 kW or smaller) in ZIP code 60643 as of September 2026, including 95 in the past 12 months. About 19% are owned by the homeowner, compared with 44% statewide, and the typical system is 5.9 kW.

Yes. A battery keeps chosen circuits running when ComEd's grid goes down, which standard solar alone can't do, and ComEd pays about $300 per kWh of capacity, around $4,050 for one 13.5 kWh battery, through its virtual power plant program.

Chicago's July 2023 storms brought more than 12,000 basement flooding reports to 311 from July 2 to 18, more than in 2021 and 2022 combined, according to WBEZ. A battery that keeps the sump pump running is one of the most common reasons Chicago homeowners add storage. See sump pump battery backup and what a home battery costs.

• A Chicago-licensed electrical contractor for the electrical work, and a city-approved solar contractor if you want the Express Permit route.
• Illinois Shines Approved Vendor status, so the incentive is passed to you.
• Landmark experience if your home is a Chicago Landmark or in a landmark district.
• Two or three quotes compared on price per watt, equipment and warranties. Our solar quote checker flags high prices.

See how to choose a solar installer in Illinois.